Low

NXP  LPC2131FBD64/01  32 Bit Microcontroller, ARM7TDMI, 60 MHz, 32 KB, 8 KB, 64 Pins, LQFP

NXP LPC2131FBD64/01
Technical Data Sheet (381.25KB) EN 모든 기술 문서 보기

이미지는 참고용으로만 제공됩니다. 자세한 내용은 제품 설명을 참조하세요.

제품 개요

The LPC2131FBD64/01 is a 16-/32-bit Microcontroller based on ARM7TDMI-S CPU with real-time emulation and embedded trace support. A 128-bit wide memory interface and an unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. The device incorporates 32kB embedded high speed flash, 8kB on-chip SRAM, 16-channel 10-bit A/D converter, three 32-bit timers, PWM channels and 47 general-purpose I/O pins.
  • In-system programming/In-application programming (ISP/IAP)
  • EmbeddedICE RT and embedded trace interfaces
  • Two 32-bit Timers/external event counters, PWM unit and watchdog
  • Low power real-time clock with independent power and dedicated 32kHz clock input
  • Multiple serial interfaces including two UARTs (16C550), two Fast I2C-bus (400 Kbit/s), SPI and SSP
  • Vectored interrupt controller with configurable priorities and vector addresses
  • Up to forty-seven 5V tolerant general purpose I/O pins
  • Up to nine edge or level sensitive external interrupt pins available
  • 60MHz Maximum CPU clock available from programmable on-chip PLL
  • On-chip integrated oscillator operates with external crystal in range of 1MHz to 30MHz
  • External oscillator up to 50MHz
  • Power saving modes include Idle and power-down
  • Individual enable/disable of peripheral functions as well as peripheral clock scaling down
  • Processor wake-up from Power-down mode via external interrupt or BOD
  • Single power supply chip with POR and BOD circuits
  • Fast GPIO ports enable port pin toggling up to 3.5 times faster than the original LPC213x
  • Dedicated result registers for ADC(s) reduce interrupt overhead
  • UART0/1 include fractional baud rate generator, auto-bauding capabilities & handshake flow-control
  • Additional BOD control enables further reduction of power consumption

제품 정보

Architecture:
ARM7TDMI
CPU Speed:
60MHz
Program Memory Size:
32KB
RAM Memory Size:
8KB
No. of Pins:
64Pins
MCU Case Style:
LQFP
No. of I/O's:
47I/O's
Embedded Interface Type:
I2C, SPI, UART
Supply Voltage Min:
3V
Supply Voltage Max:
3.6V
Packaging:
Each
Product Range:
LPC ARM7 Microcontrollers
Automotive Qualification Standard:
-
MSL:
-
SVHC:
No SVHC (17-Dec-2015)

유사 제품 찾기  공통 특성별 분류

애플리케이션

  • Communications & Networking;
  • Audio;
  • Imaging, Video & Vision;
  • Industrial;
  • Automation & Process Control;
  • Medical

법률 및 환경

MSL:
-
원산지:
Taiwan

최종후의 중요 제조 공정이 이루어진 국가

RoHS 준수:
관세 번호:
85423190
무게(kg):
.002518

대체품

유사 제품

이 제품과 기능적으로 유사한 제품을 찾을 수 있습니다. 다음 링크 중 하나를 선택하면 이 카테고리의 모든 제품 중 지정된 특성을 공유하는 제품이 나열된 제품 그룹 페이지가 표시됩니다.