Low

5.09.01 FLASHER STM8 - 

FLASH PROGRAMMER, FOR STM8 MCUS, WITH RS232 CABLE

SEGGER 5.09.01 FLASHER STM8

이미지는 참고용으로만 제공됩니다. 자세한 내용은 제품 설명을 참조하세요.

제조업체:
SEGGER SEGGER
제조업체 부품 번호:
5.09.01 FLASHER STM8
주문 참조 번호:
2099964
기술 데이터 시트:
(EN)
모든 기술 문서 보기

제품 정보

:
-
:
-
:
Flash Programmer for STM8 Series Flash MCU, USB2.0 Interface
유사 제품 찾기 위에서 특징을 선택하고 수정하여 비슷한 제품을 찾을 수 있습니다.

제품 개요

The 5.09.01 is a Flasher STM8 flash programmer for ST's STM8 series of flash microcontrollers with on chip flash. It is a programming tool for microcontrollers with on chip flash memory and STM8 core. This programmer is designed for programming flash targets with a PC program or stand alone. Flasher STM8 connects via USB, via Ethernet or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista or Windows 7. It has a built in 10 pin interface connector and a built in 4 pin interface connector, which are compatible with the debug connectors used by STM8 eval systems. The Flasher STM8 programmer can be operated from a PC with an appropriate software like Flasher STM8 software or in stand alone mode. It has been designed to allow downloading to the target as fast as the target can receive and program flash.
  • Integrated optical isolation between host and target system
  • Standard 4 pin SWIM connector
  • USB 2.0 interface
  • Full duplex 100Mbit Ethernet interface
  • Target voltage can be measured and monitored during program
  • Fully plug and play compatible
  • Stand alone SWIM programmer
  • Data files can be updated via PC program
  • Three boot modes: PC mode, stand alone mode, MSD mode
  • Target power supply via pin 1 of the 4 pin interface

애플리케이션

Embedded Design & Development

목차

Flasher STM8 programmer, USB cable, Ethernet cable, RS232 cable, Standard 4 pin SWIM ribbon cable.

관련 제품

선택한 품목 비교