아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
STM3210C-EVAL
Evaluation Board, STM32F107VC MCU, I2S Audio DAC, Stereo Audio Jack, RS-232 Channel
제품 정보
기술 문서 (2)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
제품 개요
STM32F107VCT evaluation board is a complete development platform for STM32F107VCT microcontroller. It is a ARM Cortex-M3 core based STM32F107VCT microcontroller with full speed USB-OTG, Ethernet MAC, two channels of CAN2.0A/B compliant interface, 2 channels I2S, 2 channels I2C, 5 channels USART with smartcard support, 3 channels SPI, internal 64KB SRAM and 256KB Flash, JTAG and SWD debugging support. The full range of hardware features on the board help user evaluate all peripherals (USBOTG FS, Ethernet, motor control, CAN, microSD CardTM, smartcard, USART, audio DAC, MEMS, EEPROM… etc. ) and develop own applications. Extension headers make it easy to connect a daughterboard or wrapping board for your specific application.
- 3.2inch 240 x 320 TFT colour LCD with touch screen
- Power jack, USB connector, daughterboard provide three 5V power supply options
- Boot from user Flash, system memory or SRAM
- I2S audio DAC, stereo audio jack and 2GByte microSD card
- MCU consumption measurement circuit
- Both A and B type smartcard support
- I2C compatible serial interface 64Kbit EEPROM, MEMS and I/O expander
- RS232 channel and IrDA transceiver
- USB OTG full speed, USB microAB connection
- CAN, JTAG and trace debug support
애플리케이션
Motor Drive & Control, Medical, Portable Devices, Industrial, Security, Audio, Consumer Electronics, Automotive, Audio, Automation & Process Control
경고
When external power supply connected to USB host via CN2, It is mandatory to remove the USB cable when the external power supply is OFF, else current provided by USB VBUS remain residual on board.
더 이상 제조되지 않음
필터 도구