제품 정보
제품 개요
The TXB0104YZTR is a 4-bit bidirectional Voltage-level Shifter with auto direction sensing and ±15kV ESD protect. The non-inverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 to 3.6V. This allows for universal low-voltage bidirectional translation between any of the 1.2/1.5/1.8/2.5/3.3/5V voltage nodes. VCCA should not exceed VCCB. When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pull-down resistor and the minimum value of the resistor is determined by the current-sourcing capability of the driver. This device is fully specified for partial-power-down applications using IOFF. The IOFF circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
- VCC Isolation - If either VCC input is at GND, all outputs are in the high-impedance state
- OE Input circuit referenced to VCCA
- IOFF Supports partial-power-down mode operation
- Latch-up performance exceeds 100mA per JESD 78, class II
- Green product and no Sb/Br
애플리케이션
Industrial, Automation & Process Control, Signal Processing, Sensing & Instrumentation, Wireless, Multimedia, Aerospace, Defence, Military, Consumer Electronics, Communications & Networking
기술 사양
Voltage Level Translator
DSBGA
12Pins
5.5V
-
85°C
-
No SVHC (27-Jun-2018)
-
DSBGA
1.2V
-
-40°C
-
MSL 1 - Unlimited
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:United States
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서