MAX504CPD+

The MAX504CPD+ is a low power, voltage output, serial 10bit digital to analogue converter (DAC) in 14 pin DIP package. It is specified for single +5V power supply operation and can also be operated with ±5V supplies. The MAX504 (with 2.048V internal reference) draws only 260μA of supply current. It is trimmed for offset voltage, gain and linearity. Hence, no further adjustment is necessary. The internal op-amp of MAX504 can be configured for gain of 1 or 2 as well as for unipolar or bipolar output voltages. The device can also be used as a four quadrant multiplier without external resistors or op-amp. It is typically used in battery powered test instruments, digital offset and gain adjustment machine and motion control devices.

• Supply voltage range from 4.5V to 5.5V
• Operating temperature range from 0°C to 70°C
• Compatible with SPI, QSPI and Microwire interfaces
• Buffered voltage output, power-on reset
• INL of ±0.5LSB and DNL of ±1LSB (monotonic) with single +5V supply
• Unipolar offset error of 3LSB and unipolar offset tempco of 3ppm/°C with single +5V supply
• Flexible output ranges from 0V to VDD and VSS to VDD
• Serial data output for daisy chaining
• Gain error of ±1LSB and gain error tempco of 1ppm/°C with single +5V supply
• Output load regulation of 0.5LSB at VOUT = 2V, RL = 2Kohm with single +5V supply

애플리케이션

Signal Processing, Industrial, Consumer Electronics, Portable Devices

경고

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party