더 필요하세요?
수량 | 가격 |
---|---|
1+ | ₩6,433 |
10+ | ₩5,272 |
25+ | ₩5,258 |
50+ | ₩5,243 |
100+ | ₩4,952 |
250+ | ₩4,660 |
500+ | ₩4,375 |
제품 정보
제품 개요
The X9313WSZ is a Digitally Controlled Potentiometer consists of a resistor array, wiper switches, a control section and non-volatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 31 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D and INC inputs. The position of the wiper can be stored in non-volatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide variety of applications.
- Solid-state potentiometer
- 31 Resistive elements - Temperature compensated
- Low power CMOS - 3mA Maximum active current and 500µA maximum standby current
- High reliability - 100000 Data changes per bit endurance
애플리케이션
Signal Processing, Automation & Process Control
기술 사양
10kohm
3 Wire, Serial
± 20%
5.5V
8Pins
± 300ppm/°C
70°C
-
No SVHC (21-Jan-2025)
Single
Linear
4.5V
SOIC
32
0°C
Single 32-Tap Non-Volatile Digital Pots
-
X9313WSZ의 대체 제품
1개 제품을 찾았습니다.
관련 제품
1개 제품을 찾았습니다.
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:Thailand
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서