아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
MAX2041ETP+
RF Mixer, Down/Up Converter, 1.7GHz to 3 GHz, 4.75V to 5.25V, TQFN-20
제품 개요
The MAX2041ETP+ is a high linearity, 1700MHz to 3000MHz upconversion/downconversion mixer with LO buffer/switch in 20 pin TQFN package. This high linearity passive upconverter or downconverter mixer is designed to provide 7.4dB noise figure and 7.2dB conversion loss for an RF frequency range of 1700MHz to 3000MHz to support UMTS/WCDMA, DCS, PCS and WiMAX base station transmitter or receiver applications. This mixer is ideal for high side LO injection architectures in addition to offering excellent linearity and noise performance with an LO frequency range of 1900MHz to 3000MHz. The MAX2041 also yields high level of component integration. It includes double balanced passive mixer core, dual input LO selectable switch and an LO buffer. On-chip baluns are also integrated to allow for single ended RF input for downconversion (or RF output for upconversion) and single ended LO inputs. The MAX2041 requires a nominal LO drive of 0dBm and supply current is less than 145mA.
- Supply voltage range from 4.75V to 5.25V
- Operating temperature range from -40°C to 85°C
- 33.5dBm IIP3 (input third order intercept point) for both downconversion and upconversion operation
- DC to 350MHz IF frequency range
- 23.3dBm input 1dB compression point
- Integrated LO buffer, RF and LO baluns
- Low -3dBm to +3dBm LO drive
- Built-in SPDT LO switch with 43dB LO1 to LO2 isolation and 50ns switching time
- Pin compatible with MAX2031 815MHz to 995MHz mixer
- External current setting resistor option for operating mixer in reduced power/performance mode
애플리케이션
Communications & Networking, Aerospace, Defence, Military
경고
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
제품 정보
기술 문서 (1)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
주문 예약 가능
필터 도구