MAX9730ETI+T

The MAX9730ETI+T is a 2.4W, single supply, class G power amplifier in 28 pin TQFN package. It has mono class G power amplifier with an integrated inverting charge pump power supply. The charge pump can supply up to 500mA of peak output current over 2.7VDC to 5.5VDC supply voltage range and provides 2.4W output power into an 8ohm load. The 2.4W output power allows for transient audio content to remain unclipped as the battery rail collapses over time. The MAX9730 maximizes battery life by offering high performance efficiency. Maxim’s output stage provides efficiency levels greater than class AB devices without EMI penalties commonly associated with class D amplifiers. High efficiency allows MAX9730 to be packaged in a WLP package without derating output power handling capability. The device utilizes fully differential inputs and outputs, comprehensive click and pop suppression, shutdown control and soft start circuitry.

• Click and pop level of -52dBV
• Operating temperature range from -40°C to 85°C
• Efficiency of 63% (VCC = 5V, POUT = 1W)
• Clickless/popless operation
• Chip power dissipation of 0.9W at VOUT = 2.8VRMS, f = 1KHz, RL = 8ohm and quiescent current of 8mA
• Shutdown current of 0.3μA
• Charge pump oscillator frequency (slow mode) of 330KHz at ILOAD <gt/> 100mA (normal mode)
• Output offset voltage of ±3mV at TA = +25°C and common mode rejection ratio of 68dB at fIN = 1KHz
• PSRR of 77dB at VCC = 2.7V to 5.5V and CMRR of 68dB at fIN = 1KHz
• Output voltage of 7.1Vrms (VCC = 5V f = 1KHz, 1% THD+N, ZL = 1μF + 10 ohm)

애플리케이션

Audio, Signal Processing, Consumer Electronics, Portable Devices

경고

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party