아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
PIC10F322-I/MC
8 Bit MCU, PIC10 Family PIC10F32x Series Microcontrollers, 16 MHz, 896 Byte, 64 Byte, 8 Pins, DFN
- 제조업체:
- MICROCHIP MICROCHIP
- 제조업체 부품 번호:
- PIC10F322-I/MC
- 주문 코드:
- 2074917
- 기술 데이터 시트:
- PIC10F322-I/MC Datasheet
제품 개요
The PIC10F322-I/MC is a 6/8-pin Flash-based 8-bit Microcontroller, next generation of the PIC10F family that provides an increased feature set and increased performance over the existing PIC10F family that customers have requested. These new PIC10F32X variants are based on the standard mid-range architecture (vs. the baseline for the PIC10F2XX family) and provide interrupts, deeper hardware stack, PWM, emulated data EE, increased 16MHz internal oscillator, lower power and 3 8-bit ADCs, as well as a few new integrated peripherals. These new integrated peripherals include a new Configurable Logic Cell (CLC) which allows the user to do simple Boolean functions - such as AND/OR/XOR logic functions and D/JK/SR state functions, a Numerically Controlled Oscillator (NCO) module which provides two functions.
- Flash program memory with self-read/write capability
- Mid-range core
- High endurance flash memory (HEF) - 128B non-volatile data storage
- 35 Instruction, 8 stack levels, hardware interrupts
- Low power internal - 16MHz/31kHz oscillator
- (2) Stand-alone PWM's
- (3) Channel 8b ADC with Vref
- Integrated temperature indicator
- Configurable logic cell (CLC)
- Complimentary waveform generator (CWG)
- Numerically controlled oscillator (NCO)
- Two 8-bit timers (TMR0/TMR2)
- Extended watchdog timer (EWDT)
- Brown-out reset (BOR)
- 25mA Source/sink current I/O
- In-Circuit Serial Programming™ (ICSP™)
애플리케이션
Computers & Computer Peripherals
제품 정보
기술 문서 (3)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
더 이상 재고 없음
필터 도구