TPG100009-G3

TPG100009-G3 is a Softlog ICP2PORT(G3) portable in-circuit production programmer. This is a member of the ICP(G3) family of high-speed, production-grade in-circuit programmer. This compact, battery-powered device supports up to six different programming environments, making it an ideal, low-cost solution for field upgrades. ICP2PORT(G3) programs Microchip 8-bit PIC® & AVR® MCUs and Serial EEPROMs & Flash ICs. ICP2PORT(G3) hardware is designed to support popular programming interfaces (ICSP™, JTAG, SWD, UPDI, SPI, QSPI, etc).

• On-board 32MB flash memory for non-volatile storage of HEX, configuration and serialization files
• Counter that limits the number of times a hex file can be programmed
• 3 standalone serialization schemes: sequential, random, user file (1 to 8bytes, automatic “retlw”)
• Vdd and Vpp overload protection, standalone operation
• Power supply: 3xAA batteries, USB or power adapter
• Programmable Vdd (1.8 to 5.5V) and Vpp (1.8 to 13.5V)
• Programmable delay between Vdd and Vpp (0.1 to 250ms)
• Programmable clock/data speed (500kHz to 10MHz)
• Programmable Vdd source (ICP2PORT(G3) or target)
• Vdd current limit: 100mA (40mA if powered from USB only), prevents damage to the connected

목차

Programmer unit, USB cable (A-mini USB), Sub-D 15-pin mating connector, USB install instructions, Quick start manual.