UCS1002-1-BP-TR

The UCS1002-1-BP-TR is a Programmable USB Port Power Controller with charger emulation. It provides an USB port power switch for precise control of up to 2.5 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection and back-voltage protection. Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like notebook PCs, the ability to detect attachments from a sleep or off state. After the attach detection is flagged, the system can decide to wake up and/or provide charging. In addition to power switching and current limiting modes, the UCS1002 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple® and RIM® and many others.

• Port power switch with two current limits
• Selectable/automatic cycling of USB data line charger emulation profiles
• Self-contained current monitoring and charge rationing for power allocation applications
• Automatic shutdown when battery full option
• Low power attach detection and open-drain A_DET# pin
• Ultra low power sleep state
• Optional split supply support for VBUS and VDD for low power in system standby states
• Wake on attach USB
• SMBus 2.0 /I²C Communications

애플리케이션

Power Management, Communications & Networking, Computers & Computer Peripherals