STM32F301K8U6

The STM32F301K8U6 is a STM32 F3 series 32-bit Microcontroller incorporates the high-performance ARM Cortex-M4 RISC core operating at a frequency of up to 72MHz and embedding a floating point unit (FPU), high-speed embedded memories (Flash memory up to 64kB and 16kB of SRAM) and an extensive range of enhanced I/Os and peripherals connected to two APB buses. The device offer a fast 12-bit ADCs, two comparators, an operational amplifier, up to 18 capacitive sensing channels, one DAC channel, a low-power RTC, one general-purpose 32-bit timer, one timer dedicated to motor control and up to three general-purpose 16-bit timers and one timer to drive the DAC, as well as standard and advanced communication interfaces - three I²Cs, two SPIs with multiplexed full-duplex I²S and two USARTs.

• ARM Cortex-M4 CPU with FPU, single-cycle multiplication and HW division, DSP instruction
• CRC calculation unit
• Power-on/Power down reset (POR/PDR)
• Programmable voltage detector (PVD)
• Low-power - Sleep, stop and standby
• VBAT supply for RTC and backup registers
• 4 to 32MHz Crystal oscillator
• 32kHz Oscillator for RTC with calibration
• 8MHz Internal RC with x 16 PLL option
• 40kHz Internal oscillator
• Interconnect matrix
• Temperature sensor
• 2 x Watchdog timers (Independent and window)
• SysTick Timer
• Calendar RTC with alarm, periodic wakeup from Stop/Standby
• Infrared transmitter
• Serial wire debug (SWD), JTAG
• 96-bit Unique ID

애플리케이션

Industrial