더 필요하세요?
수량 | 가격 |
---|---|
1+ | ₩20,015 |
10+ | ₩17,513 |
25+ | ₩14,511 |
50+ | ₩13,010 |
100+ | ₩12,009 |
250+ | ₩11,226 |
제품 정보
제품 개요
The DRV8302DCA is a 3-phase Gate Driver with dual current shunt amplifiers and buck regulator. It provides three half bridge drivers, each capable of driving two N-channel MOSFETs. The device supports up to 1.7A source and 2.3A peak current capability. It can operate off of a single power supply with a wide range from 8 to 60V. It uses a bootstrap gate driver architecture with trickle charge circuitry to support 100% duty cycle. It uses automatic hand shaking when the high-side or low-side MOSFET is switching to prevent current shoot through. Integrated VDS sensing of the high and low-side MOSFETs is used to protect the external power stage against overcurrent conditions. The DRV8302 also includes an integrated switching mode buck converter with adjustable output and switching frequency.
- Bootstrap gate driver with 100% duty cycle support
- Dual integrated current shunt amplifiers with adjustable gain and offset
- Hardware control interface
- Programmable dead time control (DTC) protection
- Programmable overcurrent protection (OCP)
- PVDD and GVDD under-voltage lockout (UVLO) protection
- GVDD over-voltage lockout (OVLO) protection
- Over-temperature warning/shutdown (OTW/OTS) protection
- Reported through nFAULT and nOCTW pins
- 6 or 3 PWM input modes
- 3.3 and 5V Interface support
- Green product and no Sb/Br
애플리케이션
Motor Drive & Control, Robotics, Industrial
기술 사양
Motor Gate Driver
1Outputs
-
56Pins
60V
125°C
-
No SVHC (27-Jun-2018)
HTSSOP
PMSM, Three Phase Brushless DC
2.3A
HTSSOP
8V
-40°C
-
MSL 3 - 168 hours
-
기술 문서 (1)
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:Taiwan
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서