더 필요하세요?
수량 | 가격 |
---|---|
1+ | ₩17,440 |
10+ | ₩15,260 |
25+ | ₩12,644 |
50+ | ₩11,336 |
100+ | ₩10,464 |
250+ | ₩9,782 |
제품 정보
제품 개요
The DRV8313PWP is a 2.5A 3-phase brushless DC Motor Driver. The device is intended to drive a three-phase brushless DC motor, though it can also be used to drive solenoids or other loads. Each output driver channel consists of N-channel power MOSFETs configured in a half-H-bridge configuration. The design brings the ground terminals of each driver to pins, thus allowing one driver to perform current sensing on each output. Current-limit circuitry or other functions are possible uses of an uncommitted comparator. The DRV8313 can supply up to 2.5A output current per channel (with proper PCB heat sinking at 24V and 25°C) per half-H-bridge. The device provides internal shutdown functions for over-current protection, short-circuit protection, under-voltage lockout and over-temperature.
- Individual half-bridge control
- Pins for low-side current sensing
- Low MOSFET on-resistance
- Un-committed comparator can be used for current limit or other functions
- Green product and no Sb/Br
애플리케이션
HVAC, Automation & Process Control, Motor Drive & Control
경고
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
기술 사양
Half-H-Bridge Motor Driver
3Outputs
-
28Pins
60V
85°C
-
No SVHC (27-Jun-2018)
HTSSOP
Three Phase Brushless DC
2.5A
HTSSOP
8V
-40°C
-
MSL 3 - 168 hours
-
기술 문서 (1)
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:Taiwan
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서