OPA2835ID

The OPA2835ID is a dual ultra-low power voltage feed-back Operational Amplifier with rail-to-rail output and negative rail input. Consuming only 250µA per channel and an unity gain bandwidth of 56MHz, this amplifier set an industry-leading performance-to-power ratio for rail-to-rail amplifier. For battery-powered portable applications where power is of key importance, the low power consumption and high-frequency performance of the OPA2835 device offers performance versus power that is not attainable in other devices. Coupled with a power-savings mode to reduce current to <lt/>1.5µA, the device offers an attractive solution for high-frequency amplifiers in battery-powered applications.

• 0.5µA Typical power down mode
• 10ns (2VSTEP) Rise time
• 55ns (2VSTEP) Settling time (0.1%)
• 200ns Overdrive recovery time
• 0.00015% (-116.4dBc) at 1kHz (1VRMS) SNR
• 0.00003% (-130dBc) at 1kHz (1VRMS) THD
• -70/-73dBc at 1MHz (2VPP) HD2/HD3
• 9.3nV/√Hz (f=100kHz) Input voltage noise
• 100µV (±500µV maximum) Input offset voltage
• 113dB CMRR
• 40mA Output current drive
• Green product and no Sb/Br

애플리케이션

Signal Processing, Portable Devices, Test & Measurement