58495-2

The 58495-2 is a SDE Die Set for 28 to 16AWG Multimate type III+ and type VI contacts. This SDE die set consists of crimping dies and a locator assembly and it features a wire anvil, an insulation anvil, a wire crimper, and an insulation crimper. Die retaining pins and die retaining screws are used to position and secure the dies in the tool frame. A nut is used on the upper die retaining screw to hold the locator assembly in place.

• Crimp Form-Wire Barrel Type: Open Barrel - F Crimp

애플리케이션

Maintenance & Repair

경고

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.