AD7466BRTZ-REEL7

AD7466 is a 12bit, high speed, low power, successive approximation analogue-to-digital converter (ADC). The parts operates from a single 1.6V to 3.6V power supply and feature throughput rates upto 200kSPS with low power dissipation. The parts contain a low noise, wide bandwidth track-and-hold amplifier, which can handle input frequencies in excess of 3MHz. The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS, and the conversion is also initiated at this point. There are no pipeline delays associated with the part. It is used in applications such as battery-powered systems, medical instruments, remote data acquisition, isolated data acquisition.

• Specified for VDD of 1.6V to 3.6V, linearity error is ±1.5 maximum
• Flexible power/serial clock speed management, no pipeline delays
• High speed serial interface: SPI/QSPI™/MICROWIRE™/DSP compatible
• Automatic power-down, power-down mode is 8nA typical
• Signal-to-noise ratio is 70dB minimum at (1.8V ≤ VDD ≤ 2V, VDD = 1.6V to 3.6V)
• Total harmonic distortion is -83dB typical at (VDD = 1.6V to 3.6V)
• Full power bandwidth is 3.2MHz typical at (3dB, 2.5V ≤ VDD ≤ 3.6V)
• Conversion time is 4.70μs maximum at (VDD = 1.6V to 3.6V)
• Power-down mode is 0.3μW maximum at (VDD = 3V, VDD = 1.6V to 3.6V)
• Operating temperature is -40°C to +85°C, package style is 6-lead SOT-23

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party