AD8013ARZ-14

AD8013 is a low-power, single-supply, triple-video amplifier. This has 30mA of output current and is optimized for driving one back-terminated video load (150 ohms). This makes the ideal for broadcast and professional video electronics. It offers low power of 4mA per amplifier max and runs on a single +5V to +13V power supply. The outputs of amplifier swing to within one volt of either supply rail to easily accommodate video signals. This unique among current feedback op-amp by virtue of its large capacitive load drive. This op-amp is capable of driving large capacitive loads while still achieving rapid settling time. Application includes LCD displays, video line driver, broadcast and professional video, computer video plug-in boards, consumer video, RGB amplifier in component systems.

• Three video amplifiers in one package, drives large capacitive load
• Low power, 4mA/amplifier max power supply current
• Typical bandwidth (3dB) is 125MHz (no peaking, G=+2, TA=+25°C, RLOAD=150 ohm)
• Fast settling time of 18ns (0.1%), slew rate is 400V/µs (2V step, TA=+25°C, RLOAD=150 ohm)
• High speed disable function per channel, turn-off time is 30ns
• Short circuit current is 95mA, output swing to within 1V of rails
• Typical input voltage noise is 3.5nV/√Hz (f=10KHz, TA=+25°C, RLOAD=150V)
• Output current is 30mA (+5V, TA=+25°C, RLOAD=150V)
• 14-lead SOIC package
• Temperature rating range from -40 to 85°C

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party