ADRF5050BCCZN

ADRF5050BCCZN is a non-reflective (50 ohm design) SP4T switch that is manufactured in a silicon-on-insulator (SOI) process. It operates with a dual-supply voltage +3.3V and -3.3V. The device can also operate with a single positive supply voltage (VDD) applied while the negative supply pin (VSS) is tied to the ground. The single-supply operation condition requires lower operating power while the excellent small signal performance is maintained. It employs complementary metal-oxide semiconductor (CMOS)- and low voltage transistor-to-transistor logic (LVTTL)-compatible controls. The device has enable and logic select controls to feature all off-state and port mirroring, respectively. Application includes test instrumentation, military radios, radars, and electronic countermeasures (ECMs), microwave radios and very small aperture terminals (VSATs).

• Ultrawideband frequency range from 100MHz to 20GHz
• All off state control, logic select control
• No low frequency spurs
• 0.9dB typ insertion loss between RFC and RFx (On) (TCASE = 25°C, 100MHz to 6GHz)
• 56dB typ isolation between RFC and RFx (100MHz to 6GHz, TCASE = 25°C)
• 34dBm typical 0.1dB power compression (f = 100MHz to 20GHz, TCASE = 25°C) input linearity
• 33dBm max high RF power handling (through path, TCASE = 25°C)
• Switching on and off time is 55ns typical (50% VCTRL to 90% of RFOUT)
• 80ns 0.1dB settling time (50% VCTRL to 0.1 dB of final RFOUT, TCASE = 25°C)
• 24 LGA package, temperature range from -40°C to +105°C

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party