DS2775G+

The DS2775G+ is a dual cell, stand-alone Li+ fuel gauge IC with protector in 14 pin TDFN package. This device supports rechargeable lithium-ion (Li+) and Li+ polymer (Li-Poly) batteries in mAh and as a percentage of full. Safe operation is ensured by the integrated Li+ protector. DS2775 capability includes precision measurements of voltage, temperature and current along with a cell characteristics table and application parameters. The capacity registers report a conservative estimate of the amount of charge that can be removed given the current temperature, discharge rate, stored charge and application parameters. the device offers a 16 bytes of EEPROM for use by the host system and/or pack manufacturer to store battery lot and date tracking information. The EEPROM can also be used for non-volatile storage of system and/or battery usage statistics.

• Supply voltage range is 4V to 9.2V
• Operating temperature range from -20°C to 70°C
• 1-wire interface with 64bit unique ID
• High-side nFET driver and protection circuitry
• Estimates cell aging between learn cycles
• Uses low-cost sense resistor
• Allows calibration of gain and temperature coefficient
• Programmable thresholds for overvoltage and overcurrent
• 32byte parameter EEPROM

애플리케이션

Power Management, Portable Devices, Imaging, Video & Vision

경고

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party