LT1016CS8#TRPBF

LT1016 is an UltraFast precision 10ns, comparator. It interfaces directly to TTL/CMOS logic while operating off either ±5V or single 5V supplies. Tight offset voltage specifications and high gain allow the device to be used in precision applications. Matched complementary outputs further extend the versatility of this comparator. A unique output stage provides active drive in both directions for maximum speed into TTL/CMOS logic or passive loads, yet does not exhibit the large current spikes found in conventional output stages. It is widely used in application such as high speed A/D converters, high speed sampling circuits, line receivers, extended range V-to-F converters, fast pulse height/width discriminators, zero-crossing detectors, current sense for switching regulators, high speed triggers, crystal oscillators etc.

• Low offset voltage
• No minimum input slew rate requirement
• No power supply current spiking
• Output latch capability
• Input offset voltage is 1mV typical
• Input offset voltage drift is 4µV/°C typical
• Input bias current is 5µA typical
• Small-signal voltage gain is 3000V/Typical
• Operating temperature is 0°C to 70°C
• Packaging style is 8-lead plastic SO

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party