MAX5721EUA+

The MAX5721EUA+ is a 10bit, low power, dual, voltage output DAC with serial interface in 8 pin µMAX package. The wide supply voltage range and 112μA supply current accommodate low power and low voltage applications. DAC outputs employ on-chip precision output amplifiers that swing rail to rail. The MAX5721’s reference input accepts a voltage range from 0 to VDD. In power-down the reference input is high impedance, further reducing the system’s total power consumption. The 20MHz, 3-wire SPI, QSPI, MICROWIRE and DSP-compatible serial interface saves board space and reduces the complexity of opto and transformer isolated applications. The MAX5721 on-chip power-on reset (POR) circuit resets the DAC outputs to zero and loads the output with a 100Kohm resistor to ground. This provides additional safety for applications that drive valves or other transducers that need to be off on power-up. The MAX5721’s software-controlled power-down reduces supply current to less than 0.3μA.

• Supply voltage range is 2.7V to 5.5V
• Operating temperature range from -40°C to 85°C
• Fast 20MHz 3-wire SPI/QSPI/MICROWIRE and DSP-compatible serial interface
• Schmitt triggered inputs for direct interfacing to optocouplers
• Software selectable output loads (1Kohm, 100Kohm or high impedance) in power-down mode
• Rail to rail output buffer

애플리케이션

Signal Processing, Portable Devices

경고

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party