MAX6921AWI+
Display VFD Tube Driver, 20 Output, 76 V Anode, 3 V to 5.5 V, 5 MHz, Serial Interface, WSOIC-28

| 제조업체 | ANALOG DEVICES |
|---|---|
| 제조업체 부품 번호 | MAX6921AWI+복사 |
| 제조업체 표준 리드 타임 | 12주 |
| 주문 코드 | 2516939 |
| 귀하의 부품 번호 | |
| 기술 데이터 시트 |
더 필요하세요?
| 수량 | 가격 |
|---|---|
| 1+ | ₩20,492 |
| 10+ | ₩16,180 |
| 25+ | ₩15,103 |
| 100+ | ₩13,919 |
| 250+ | ₩13,355 |
| 500+ | ₩13,015 |
제품 정보
| 제조업체 | ANALOG DEVICES |
|---|---|
| 제조업체 부품 번호 | MAX6921AWI+복사 |
| 제조업체 표준 리드 타임 | 12주 |
| 주문 코드 | 2516939 |
| 기술 데이터 시트 | |
| Display Driver Type | VFD Tube Driver |
| No. of Digits | - |
| No. of Segments | - |
| IC Case / Package | WSOIC |
| No. of Pins | 28Pins |
| Supply Voltage Min | 3V |
| Supply Voltage Max | 5.5V |
| Interfaces | Serial |
| Product Range | - |
| Operating Temperature Min | -40°C |
| Operating Temperature Max | 125°C |
| MSL | MSL 1 - Unlimited |
| SVHC | No SVHC (04-Feb-2026) |
제품 개요
The MAX6921AWI+ is a 20 output, 76V, serial interfaced VFD tube driver in 28 pin WSOIC package. It is a 20 output, 76V, vacuum fluorescent display (VFD) tube driver that interface a multiplexed VFD tube to a VFD controller such as the MAX6850 and MAX6853 or to a microcontroller. The MAX6921 also ideal for driving static VFD tubes or telecom relays. Data is input using an industry standard 4 wire serial interface (CLOCK, DATA, LOAD, BLANK) compatible with either Maxim’s or industry standard VFD driver and controller. For easy display control, the active high BLANK input forces all driver outputs low, turning the display off and automatically puts the MAX6921 into shutdown mode. Display intensity can also be controlled by directly pulse width modulating the BLANK input. The MAX6921 has a serial interface data output DOUT allowing any number of devices to be cascaded on the same serial interface.
- Supply voltage range is 3V to 5.5V
- Operating temperature range from -40°C to 125°C
- 5MHz industry standard 4 wire serial interface
- Grid/anode supply range from 8V to 76V
- Push-pull CMOS high voltage outputs
- Outputs can source 40mA, sink 4mA continuously
- Outputs can source 75mA repetitive pulses
- Outputs can be paralleled for higher current drive
- Any output can be used as a grid or an anode driver
- Blank input simplifies PWM intensity control
애플리케이션
Communications & Networking, Avionics, Automotive, Industrial, Security, Consumer Electronics
경고
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
메모
ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party
기술 사양
| Display Driver Type | VFD Tube Driver |
|---|---|
| No. of Segments | - |
| No. of Pins | 28Pins |
| Supply Voltage Max | 5.5V |
| Product Range | - |
| Operating Temperature Max | 125°C |
| SVHC | No SVHC (04-Feb-2026) |
| No. of Digits | - |
|---|---|
| IC Case / Package | WSOIC |
| Supply Voltage Min | 3V |
| Interfaces | Serial |
| Operating Temperature Min | -40°C |
| MSL | MSL 1 - Unlimited |
기술 문서 (1)
법률 및 환경
| 원산지: 최종후의 중요 제조 공정이 이루어진 국가원산지: | Malaysia 최종후의 중요 제조 공정이 이루어진 국가 |
|---|---|
| 관세 번호: | 85423990 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| RoHS 준수: | 예 RoHS |
| RoHS 프탈레이트 준수: | 예 RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| 제품 준수 증명서 다운로드 | 제품 준수 증명서 |
| 무게(kg): | .002449 |
