MAX9286GTN+

MAX9286GTN+ is a quad channel, 1.5Gbps GMSL deserializer with coax or STP input and CSI-2 output. This gigabit multimedia serial link (GMSL) deserializer receives data from up to four GMSL serializers over 50 ohm coax or 100 ohm shielded twisted-pair (STP) cables and output data on four CSI-2 lanes. Each serial link has an embedded control channel operating from 9.6Kbps to 1Mbps in UART-to UART, UART-to-I²C, and I²Cto-I²C mode. Using the control channel, a μC can program the serializers, deserializer, and peripheral device registers at any time, independent of video timing. A maskable broadcast write speeds programming of image sensor registers. For use with longer cables, the deserializer has a programmable cable equalizer and programmable error detection and correction. The serial input meets ISO 10605 and IEC 61000- 4-2 ESD standards. It is used in applications such as surround-view camera systems, machine vision systems, 3D camera systems.

• Data from image sensors are synchronized to the same pixel
• Automatic internal/external generation of camera sync
• Equalization allows 15m length cable operation at full speed
• Built-in PRBS tester for BER testing of the serial link
• High-immunity mode for maximum control-channel noise rejection
• ±8kV contact, ±20kV air ISO 10605 and ±8kV contact, ±12kV IEC 61000-4-2 ESD protection
• Programmable choice of nine default device addresses
• 1 to 4 lane CSI-2 output with 80Mbps to 1200Mbps per lane
• 9.6kbps to 1Mbps control channel in UART, mixed UART/I²C, or I²C mode with clock-stretch capability
• Operating temperature range from -40°C to +105°C, 56-pin TQFN package

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party