6019261009

The SHS series Safety Interlock Switch has been optimised to allow its effective use on aluminium section systems. Its shallow depth, even when fully opened makes it ideally suited for use in constricted installation conditions on machines. Safety switches with separate actuators are often subjected to high mechanical stresses, especially when they are mounted on closing edges. The SHS hinge switch sets new standards. The safety guard is monitored directly in the hinge. Protective hoods and safety guards on machines such as gates in safety gate systems are often pivot mounted with hinges. The concealed arrangement of the safety switch provides a high degree of protection against tampering. One or several SHS switches are be used depending on control requirements. In many applications the conventional load bearing hinge can be replaced by a blank hinge with identical design features as the safety hinge. This has significant rationalisation benefits.

• Equipped with a positively opening safety contact
• Angle range extends from 0 to 225°
• Safety device ensures positive locking after the switch has been set
• Plug connector and fixed cable connections are available for axial and radial (rear) connection
• A pressure die-cast zinc enclosure allows versatile use of the SHS switch in varied applications
• Loads of up to 750N in axial direction
• Loads of up to 1000N in radial direction
• IP67 Protection rating

애플리케이션

Industrial, Safety