
| 제조업체 | DFROBOT |
|---|---|
| 제조업체 부품 번호 | DFR0300복사 |
| 제조업체 표준 리드 타임 | 13주 |
| 주문 코드 | 2946108 |
| Product Range | Gravity Series |
| 귀하의 부품 번호 | |
| 기술 데이터 시트 |
더 필요하세요?
| 수량 | 가격 |
|---|---|
| 1+ | ₩108,005 |
제품 정보
| 제조업체 | DFROBOT |
|---|---|
| 제조업체 부품 번호 | DFR0300복사 |
| 제조업체 표준 리드 타임 | 13주 |
| 주문 코드 | 2946108 |
| Product Range | Gravity Series |
| 기술 데이터 시트 | |
| Silicon Manufacturer | - |
| Accessory Type | Analog Electrical Conductivity Sensor /Meter V2 |
| Silicon Family Name | - |
| Core Architecture | - |
| Core Sub-Architecture | - |
| Silicon Core Number | - |
| Kit Contents | Analog Electrical Conductivity Sensor/Meter Board, Electrical Probe, Cable, Gasket, Connector |
| For Use With | DFRobot DFRduino UNO V3.0(R3) Development Boards |
| Product Range | Gravity Series |
| SVHC | No SVHC (04-Feb-2026) |
제품 개요
The DFR0300 from DFRobot is a comprehensive kit which allows you to measure the electrical conductivity of aqueous solutions and evaluate water quality. With a plug-and-play design, intuitive software library and support for 3.3V/5V microcontrollers (such as Arduino) it can be a simple and effective measuring solution. The software library uses a two-point calibration method, temperature compensation algorithm and can automatically identify standard buffer solution. Typical applications include water quality monitoring, aquaculture as well as hydroponics & aquaponics.
- 3V-5V Wide voltage input range and support for both 5V and 3.3V control boards
- Hardware based filter for the output signal reduces jitter
- Reduced polarisation to improve precision and prolong probe lifespan
- Plug and play Gravity 3-pin interface and BNC probe connector for convenience, no soldering required
- Board output voltage: 0-3.4V
- Measurement Accuracy: ±5%
- Board size: 42x32mm
- Laboratory Grade probe
- Probe cell constant: 1.0
- Probe Detection Range: 0-20ms/cm
- Recommended Detection Range: 1-15ms/cm
- Temperature Range: 0-40°C
- Probe Life: Approx. <gt/>0.5 year (depending on frequency of use)
- Probe cable length: 1m
목차
Conversion board, conductivity probe (K=1), 2x 1413us buffer solution, 2x 12.88ms buffer solution, Analogue sensor cable, 2x waterproof gaskets, BNC cap, screws and standoffs.
메모
Note: The probe is laboratory-grade, it is not designed for long periods of immersion and should be cleaned after each use.
기술 사양
| Silicon Manufacturer | - |
|---|---|
| Silicon Family Name | - |
| Core Sub-Architecture | - |
| Kit Contents | Analog Electrical Conductivity Sensor/Meter Board, Electrical Probe, Cable, Gasket, Connector |
| Product Range | Gravity Series |
| Accessory Type | Analog Electrical Conductivity Sensor /Meter V2 |
|---|---|
| Core Architecture | - |
| Silicon Core Number | - |
| For Use With | DFRobot DFRduino UNO V3.0(R3) Development Boards |
| SVHC | No SVHC (04-Feb-2026) |
기술 문서 (1)
법률 및 환경
| 원산지: 최종후의 중요 제조 공정이 이루어진 국가원산지: | China 최종후의 중요 제조 공정이 이루어진 국가 |
|---|---|
| 관세 번호: | 85437090 |
| US ECCN: | EAR99 |
| EU ECCN: | NLR |
| RoHS 준수: | 예 RoHS |
| RoHS 프탈레이트 준수: | 예 RoHS |
| SVHC: | No SVHC (04-Feb-2026) |
| 제품 준수 증명서 다운로드 | 제품 준수 증명서 |
| 무게(kg): | .314793 |
