ZXMS81045SPQ-13

ZXMS81045SPQ-13 is an IntelliFET high-side power switch. It is a single-channel, high-side, power switch in a SO-8EP (Type E) exposed heatsink package incorporating protective and diagnostic functions. The device comprises a monolithic N-channel vertical power MOSFET with integrated temperature and current sensors, with a charge-pumped gate supply and has a low quiescent current in OFF state. The device is enabled by active high 3.3V and 5V logic level drive to the inputs. The device includes a diagnostic current-sense output proportional to load current and a defined diagnostic fault signal in case of overload operation, overtemperature, short-circuit or open load conditions. Applications include high-side switching with diagnostic feedback for: (12V grounded loads, resistive, inductive, and capacitive loads, suitable for high inrush current loads, incandescent lamps (P27W/P21W), motors, etc), compact low-power replacement for: (relays, fuses, and discrete circuits).

• Reverse battery protection using external components, overvoltage protection including load dump
• Voltage dependent current limiting, overtemperature protection with auto-restart
• Stable undervoltage protection, loss of ground protection with external components
• ESD protection, enhanced short circuit protection
• Operating temperature range from -40 to 150°C
• RDS(ON) typical at TJ= 25°C is 34mohm
• Recommended operating voltage is 18V maximum
• 230μs maximum turn-OFF/ON time
• AEC-Q100 qualified, PPAP capable
• Power dissipation is 1.6W max at Tamb = 85°C, Tj < 150°C