CW1B-A1E10R

The Flush Silhouette CW series pushbutton switches from IDEC are flush mount design switches with metallic or black plastic bezel. A short depth behind the panel allows the switches to fit in smaller machines and panels (double contact block: 59.9mm (maintained: 64.6mm), single contact block: 39.9mm (maintained: 44.6mm)). Up to 3 contact blocks can be installed. Contacts block can be removed by two action locking lever with an integrated guard ensuring safety. These switches are approved by UL508 (file number: E68961), CSA 22.2 No.14, EN60947-5-1 and GB14048.5 standards.

• Sleek and stylish switches with 2.5mm thick bezel
• ø22.3mm mounting hole compliant with IEC 60947-5-1
• Maintained/momentary operation facilitated
• Available in various shapes and colours
• 1NO, 1NC, 1NO-1NC, 1NO-2NC, 2NO, 2NC, 2NO-1NC, 2NO-2NC, 3NO and 3NC contact configuration
• 2000000/1000000 (momentary), 250000/100000 (maintained) mechanical life(single/double contact block)
• 24V/120V/240V rated operating voltage, up to 10A rated operating current
• Maximum contact resistance is 50mohm, 100Mohm minimum (500VDC megger) insulation resistance
• Operating temperature of -25 to 60°C (no freezing)
• IP66, IP67, UL type 4X (used with rubber boot (CW9Z-D11, -D12)) and IP65 degree of protection