입고 시 알림 요청
수량 | 가격 |
---|---|
1+ | ₩2,208 |
10+ | ₩2,190 |
50+ | ₩2,172 |
100+ | ₩2,154 |
250+ | ₩2,136 |
500+ | ₩2,118 |
1000+ | ₩2,100 |
2500+ | ₩2,084 |
제품 정보
제품 개요
CY8CMBR3106S-LQXI is a CapSense® Express™ controller that enables advanced, yet easy-to-implement, capacitive touch sensing user interface solutions. This register-configurable family, which supports up to 16 capacitive sensing inputs, eliminates time-consuming firmware development. This controller is ideal for implementing capacitive buttons, sliders, and proximity sensing solutions with minimal development-cycle times. It features an advanced analog sensing channel and the Capacitive Sigma Delta PLUS (CSD PLUS) sensing algorithm, which delivers a signal-to-noise ratio (SNR) of greater than 100:1 to ensure touch accuracy even in extremely noisy environments. These controllers are enabled with Cypress’s SmartSense™ Auto-tuning algorithm, which compensates for manufacturing variations and dynamically monitors and maintains optimal sensor performance in all environmental conditions.
- Register-configurable CapSense express controller, ultra-low radiated emissions
- Superior noise-immunity performance against conducted and radiated noise
- SmartSense auto-tuning, sets and maintains optimal sensor performance during run time
- User-configurable LED brightness for visual touch feedback
- Buzzer signal output for audible touch feedback, analog voltage output
- Improper value of the modulating capacitor (CMOD), out of range sensor parasitic capacitance (CP)
- Data viewing and monitoring for CapSense buttons, sliders, and proximity sensors
- Up to 16 total capacitive, upto 2 proximity sensors, shield
- Low-power 1.71V to 5.5V operation, up to 11 CapSense buttons
- Industrial temperature range from -40°C to 85°C, 24-pin QFN package
기술 사양
I2C
1.71V
5.5V
24Pins
85°C
MSL 1 - Unlimited
I2C
QFN
QFN
-40°C
-
No SVHC (21-Jan-2025)
기술 문서 (1)
관련 제품
1개 제품을 찾았습니다.
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:Taiwan
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서