아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
DK-20680A
DEVELOPMENT BOARD, 6 AXIS MOTION SENSOR
- 제조업체:
- INVENSENSE INVENSENSE
- 제조업체 부품 번호:
- DK-20680A
- 주문 코드:
- 3395000
- 기술 데이터 시트:
- DK-20680A Datasheet
제품 개요
Comprehensive SmartMotion development platform for IAM-20680, a high performance 6-axis motion sensor that combines 3-axis gyroscope and 3-axis accelerometer. The platform designed around a Microchip G55 microcontroller unit (MCU) can be used by developers for rapid evaluation and development of IAM-20680-based solutions. The DK-20680A includes an on-board embedded debugger so that external tools are not required to program or debug the G55 MCU. The development kit comes with all the necessary software including InvenSense MotionLink, a GUI based development tool and embedded Motion Drivers for IAM-20680. Embedded Motion Drivers (eMD) consist of a set of application programming interfaces (APIs) to configure various aspects of the platform including IAM-20680 sensor parameters such as full-scale range (FSR), output data rate (ODR), low-power or low-noise mode, accelerometer, gyroscope Calibration and sensor interface to host (I2C, SPI).
- Integrated TDK InvenSense motion sensor
- Support for other InveSense sensors with plug in daughter boards (DB) and evaluation boards (EVB)
- Microchip SAMG55 microcontroller with 512KB flash
- Built-in FTDI USB to UART interface for fast motion sensor data transfer
- USB connectors for host interface to software debug and data logging
- Board power supply through USB
- Can be operated by external battery with on board battery charger
목차
Development board IAM-20608A, Software.
경고
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
제품 정보
기술 문서 (1)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
1 재고 더 필요하세요?
×
지금 제품을 예약하실 수 있습니다 평상시와 같이 필요한 수량을 주문하고 결제하세요. 지금 바로 배송할 수 없는 수량은 주문 예약으로 진행되며 공급업체가 납품하는 대로 배송될 예정입니다. 제품이 발송될 경우에만 대금이 청구됩니다.
22. 1. 2에 5 추가 가능
주문 시 추가 재고 준비 공급업체의 대략적인 리드타임 22. 6. 13
3-4 영업일 이내에 배달 가능한 재고 1 UK
필터 도구