아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.

제품이 검색 결과와 정확히 일치하지 않을 수 있음

이전에 고객님은 이 제품을 구매하셨습니다. 주문 내역 보기

 
 

65200

Ratchet Set, Electrician Mini, 110 mm

KLEIN TOOLS 65200
×
×

이미지는 참고용으로만 제공됩니다. 자세한 내용은 제품 설명을 참조하세요.

제조업체 부품 번호:
65200
주문 코드:
3758583
기술 데이터 시트:
65200   데이터 시트
모든 기술 문서 보기

제품 정보

비슷한 제품을 보시겠습니까? 아래에서 필요한 속성을 선택하고 버튼을 누르세요 ×


:
-

:
-

:
-

:
-

:
110mm

:
-

유사 제품 찾기 위에서 특징을 선택하고 수정하여 비슷한 제품을 찾을 수 있습니다.

기술 문서 (1)

CAD 다운로드

×

사용 약관

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

수락 취소

제품 개요

65200 is a 5-piece, slim-profile mini ratchet set. This is the perfect answer for fastening in small, tight spaces. The 72-tooth, low-profile gear head only needs 5-Degrees of sweep allowing professionals to fasten in spots other drivers just won't fit. The handle is designed with a finger loop for control and convenience, and is made of high-strength Chromium-Vanadium steel for increased torque and long tool life. The 1/4inch dual-drive head has integrated 5/16 and 1/4inch nut drivers. So, there's no need to go back to the toolbox. The 72-tooth ratchet only needs a 5-degree sweep for tight areas. Suitable for ratcheting driver for tight spaces.
  • Slim profile, steel material, 1/4inch dual-drive, hex 1/4inch, 5/16inch head type
  • ASME B107-210 standard
  • 110mm overall length, 20mm overall height, 30mm overall width
  • 1/4inch dual-drive head and socket adapter for more versatility
  • High-strength, steel construction increases torque and tool life
  • Ring magnet and bit clip for better bit retention
  • Finger loop provides one-hand driving and convenient storage

목차

Slim-profile mini ratchet set, set 1/4inch and 5/16inch, nut driver, 1/4inch socket adapter, #1 and #2 phillips; 3/16inch and 1/4inch slotted drive bits.

각주

Always wear approved eye protection.

주문 예약 가능

공급업체의 리드타임은 약 23. 5. 8이며, 이 때에 더 많은 상품이 준비 됩니다.

시장 상황으로 인해 배송 기간은 일반적 지침일 뿐이며, 직전에 통지하여 변경될 수 있습니다.

입고 시 알림 요청

₩51,853

가격 책정을 사용할 수 없습니다. 고객 서비스 센터하십시오.

가격기준
주문 배수수량: 1 주문 최소수량: 1
수량 가격 가격
 
 
1+ ₩51,853
프로모션 가격
계약 가격
웹 전용 가격
웹 전용 계약 가격
 
 
 

가격 책정을 사용할 수 없습니다. 고객 서비스 센터하십시오.

No longer stocked:: No Longer Manufactured::
장바구니에 추가 장바구니에 추가 사전 주문
추가
제한된 품목
부품 번호 /라인 메모 추가
총계 가격:
총계 가격: ( )
총계 가격: --