LF 1010-S

LF 1010-S is a current transducer. It is used for the electronic measurement of current: DC, AC, pulsed with galvanic separation between the primary and the secondary circuit. It is approved by EN 50155: 2021, EN 50124-1: 2017, EN 50121-3-2: 2016, IEC 62497-1: 2010, IEC 61010-1: 2010, UL 508: 2013. It is used in applications such as windmill inverters, single or three phase inverters, propulsion and braking choppers, propulsion converters, auxiliary converters, high power drives, substations.

• Bipolar and insulated current measurement
• Closed loop (compensated) current transducer
• Current output, panel mounting
• Connection to secondary circuit on Molex Mini-Fit Jr 5566 with gold plated pin
• Shield between primary and secondary connected on -UC
• High accuracy, very low offset drift over temperature
• Supply voltage range from ±14.25V to ±25.2V, IPN = 1000A
• Sensitivity error is 0.15% maximum, linearity error is 0.15% of IP N maximum
• Frequency bandwidth is 200KHz typical at (TA = 25°C)
• Operating temperature range from -40°C to 85°C

경고

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.