A3P125-VQG100I

A3P125-VQG100I is a ProASIC3 flash-based FPGA. It offers performance, density, and features beyond those of the ProASICPLUS® family. The non-volatile flash technology gives the ProASIC3 device the advantage of being a secure, low-power, single-chip solution that is Instant On. The ProASIC3 is reprogrammable and offers time-to-market benefits at an ASIC-level unit cost. These features enable designers to create high-density systems using existing ASIC or FPGA design flows and tools. The ProASIC3 device offers 1kbit of on-chip, reprogrammable, non-volatile FlashROM storage as well as clock conditioning circuitry based on an integrated phase-locked loop (PLL). The ProASIC3 device supports the ARM Cortex-M1 processor.

• High performance: 350MHz system performance, 3.3V, 66MHz 64-bit PCI
• Core voltage for low power, support for 1.5V-only systems, low-impedance flash switches
• High-performance routing hierarchy: segmented, hierarchical routing and clock structure
• Wide range power supply voltage support per JESD8-B, allowing I/Os to operate from 2.7V to 3.6V
• Bank-selectable I/O voltages-up to 4 banks per chip
• I/O registers on input, output, and enable paths, hot-swappable and cold sparing I/Os
• Programmable output slew rate and drive strength, weak pull-up/-down
• 1024Logic cells, 36Kbit total RAM
• 100-pin VTQFP package
• Operating temperature range from -40°C to 100°C