AT93C46E-PU

The AT93C46E-PU is a 1kB serial Electrically-Erasable Programmable Read-Only Memory (EEPROM) organized as 64 words of 16 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT93C46E is enabled through the chip select pin (CS) and accessed via a 3-wire serial interface consisting of data input (DI), data output (DO) and shift clock (SK). Upon receiving a Read instruction at DI, the address is decoded and the data is clocked out serially on the data output DO pin. The write cycle is completely self-timed and no separate erase cycle is required before write. The write cycle is only enabled when the part is in the erase/write enable state. When CS is brought high following the initiation of a write cycle, the DO pin outputs the ready/busy status of the part.

• Matte tin (lead-free/halogen-free) lead finish
• Low-voltage and standard-voltage operation
• 3-wire Serial interface
• Self-timed write cycle (5ms maximum)
• High reliability

애플리케이션

Industrial, Commercial, Motor Drive & Control, Consumer Electronics, Lighting, Metering