ATMEGA168A-PU

The ATMEGA168A-PU is a high-performance 8bit AVR RISC-based microcontroller combines 16kb ISP flash memory with read-while-write capabilities, 512B EEPROM, 23 general purpose I/O lines, 32 general purpose working registers, three flexible timer/counters with compare modes, internal and external interrupts, serial programmable USART, a byte-oriented 2-wire serial interface, SPI serial port, 6-channel 10-bit A/D converter (8-channels in TQFP and QFN/MLF packages), programmable watchdog timer with internal oscillator and five software selectable power saving modes. The device operates between 1.8 to 5.5V. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

• High-performance, low-power AVR® 8bit microcontroller
• Advanced RISC Architecture
• High endurance non-volatile memory segments
• Atmel® QTouch® library support
• Power-on reset and programmable brown-out detection
• Internal Calibrated Oscillator
• External and internal interrupt sources
• Idle, ADC noise reduction, power-save, power-down, standby and extended standby sleep modes
• 0 to 20MHz at 4.5 to 5.5V speed grade
• 0.2mA active mode, 0.1µA power-down mode, 0.75µA (32KHz RTC) power-save mode power consumption

경고

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.