제품 정보
제품 개요
The DM183026 is a mtouch cap sense evaluation kit provides a simple platform for developing a variety of capacitive touch sense applications. This capacitive evaluation kit is intended to be used to develop sensors and software using microchip's mTouch technologies. It is used by first connecting a sensor board, and then supplying power to the board via USB, Pickit 2, or Pickit Serial analyser. The connector on the right side, with numbers 0 to 15, is the connector for sensing channels. The number, from 0 to 15, represents the microcontroller's sensing channel. The vertical two row header is for debugging, to give easy access to some of the microcontroller pins. Debugging may also be done by Programmers, or by I2C or USB with the mTouch diagnostic tool. When using the evaluation kit out of the box, the LEDs default function is to illuminate on a key press. All functionalities may be reprogrammed by using a programmer, and reprogramming the firmware in the device.
- Direct eight key Plug-in board
- Matrix key Plug-in board
- Two channel slider Plug-in board
- Four channel slider Plug-in board
애플리케이션
Embedded Design & Development, Wireless, Portable Devices, Sensing & Instrumentation
목차
PIC16F727 CSM Motherboard, PIC24FJ64GB106 Motherboard, Direct 8 Key Board, 12 Key matrix sensor board, four channel Slider Sensor Board, Two channel Slider Sensor Board, PICKit Serial analyser, USB Cable.
기술 사양
Capacitive Touch
No SVHC (15-Jan-2018)
Direct 8 Key Board, 12 Key Matrix Sensor Board, 4/2-CH Slider Sensor Board, PICKit Serial Analyzer
기술 문서 (1)
관련 제품
3개 제품을 찾았습니다.
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:United States
최종후의 중요 제조 공정이 이루어진 국가
RoHS
제품 준수 증명서