EVQ7220-R-00A

EVQ7220-R-00A is an evaluation board designed to demonstrate the capabilities of the MPQ7220, a boost converter with six channel current sources. The MPQ7220 is designed for driving automotive tail lights. The MPQ7220 uses peak current mode for the pulse-width modulation (PWM) control architecture. The switching frequency (fSW) can be configured by a resistor. The device independently regulates the current in each LED string to the value set by an external current-setting resistor. The MPQ7220 is available in a QFN-24 (4mmx4mm) package. The EVQ7220-R-00A is a fully assembled and tested, boost LED driver evaluation board. It can generate an LED current of up to 100mA from a 3.5V to 36V input voltage (VIN) range with a 450kHz fSW.

• Internal 100mohm, 50V MOSFET
• Up to 2.2MHz configurable switching frequency (FSW)
• External sync SW function
• Pulse-width modulation (PWM) dimming: 100Hz to 20kHz dimming frequency
• Excellent EMI performance and frequency spread spectrum (FSS)
• Disconnect output voltage (VOUT) from VIN
• 2.5% current matching
• Protections include LED short protection, LED open protection, OTP, OCP & inductor short protection
• Configurable LED short and OVP thresholds
• Cycle-by-cycle current limiting

메모

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.