아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.

제품이 검색 결과와 정확히 일치하지 않을 수 있음

이전에 고객님은 이 제품을 구매하셨습니다. 주문 내역 보기

 
 

MCSPTE1AK144

Development Kit, S32K144, GD3000, Motor Control, 3 Phase BLDC & PMSM Motor Controller

NXP MCSPTE1AK144
×
×

이미지는 참고용으로만 제공됩니다. 자세한 내용은 제품 설명을 참조하세요.

제조업체:
NXP NXP
제조업체 부품 번호:
MCSPTE1AK144
주문 코드:
3677377

제품 개요

S32K144 development kit engineered for Brushless Direct Current (BLDC) motor control (targeting Heating, Ventilation and Air Conditioning (HVAC) or electric pumps) and 3-phase Permanent Magnet Synchronous Motor (PMSM) control (targeting active suspension or electric powertrain). Based on the 32-bit Arm® Cortex®-M S32K1 microcontroller and the GD3000 Pre-Driver, the MCSPTE1AK144 enables rapid prototyping and evaluation of BLDC and PMSM control applications without having to wait for the final hardware design. The MCSPTE1AK144 application software takes advantage of the Automotive Math and Motor Control Library Set and provides a complete reference implementation for both 3-phase BLDC and PMSM motor control.
  • 32-bit Arm® Cortex®-M4F based S32K144
  • GD3000: 3-phase brushless motor pre-driver, UJA1169TK mini high-speed CAN system basis chip
  • S32K144 evaluation board with LIN and CAN connectivity support, OpenSDA programming/debugging
  • DEVKIT-MOTORGD up to 12V/5A 3-phase power stage board based on SMARTMOS™ GD3000
  • Low-cost PM motor 3-phase PM motor equipped with HALL sensor, 24VDC, 4000RPM, 40W, 45ZWN24-40
  • USB cable
  • 12VDC power supply
  • Low-voltage 3-phase permanent magnet motor (BLDC or PMSM)

제품 정보

비슷한 제품을 보시겠습니까? 아래에서 필요한 속성을 선택하고 버튼을 누르세요 ×


:
3 Phase BLDC & PMSM Motor Controller

:
NXP

:
Motor Control

:
S32K144, GD3000

:
Development Kit S32K144 & GD3000

:
-

유사 제품 찾기 위에서 특징을 선택하고 수정하여 비슷한 제품을 찾을 수 있습니다.

기술 문서 (1)

CAD 다운로드

×

사용 약관

CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.

수락 취소

1 재고 더 필요하세요?

3-4 영업일 이내에 배달 가능한 재고 1 영국

시장 상황으로 인해 배송 기간은 일반적 지침일 뿐이며, 직전에 통지하여 변경될 수 있습니다.

₩458,087

가격 책정을 사용할 수 없습니다. 고객 서비스 센터하십시오.

가격기준
주문 배수수량: 1 주문 최소수량: 1
수량 가격 가격
 
 
1+ ₩458,087
프로모션 가격
계약 가격
웹 전용 가격
웹 전용 계약 가격
 
 
 

가격 책정을 사용할 수 없습니다. 고객 서비스 센터하십시오.

No longer stocked:: No Longer Manufactured::
장바구니에 추가 장바구니에 추가 사전 주문
추가
제한된 품목
부품 번호 /라인 메모 추가
총계 가격:
총계 가격: ( )
총계 가격: --