C8051F061-GQ

The C8051F061-GQ is a highly integrated mixed-signal high-speed pipelined 8-bit ISP Flash Microcontroller featuring 8051-compatible CIP-51 core, 64kB of in-system programmable flash memory, 4352 (4096 + 256) byte of on-chip RAM, two separate 16-bit high speed (SAR) ADCs. Each ADC operates up to 1Msps; the highest resolution SAR ADC that has ever been integrated onto a microcontroller. In addition these devices include a 10-bit ADC and two separate 12-bit DACs. With on-chip VDD monitor, watchdog timer and clock oscillator, the C8051F06x family of devices are truly stand-alone system-on-a-chip solutions. All analog and digital peripherals are enabled/disabled and configured by user firmware. The flash memory can be reprogrammed even in-circuit, providing non-volatile data storage and also allowing field upgrades of the 8051 firmware.

• High-speed 8051 μC Core
• Pipelined instruction architecture - Executes 70% of instruction set in 1 or 2 system clocks
• Up to 25MIPS throughput with 25MHz clock
• Flexible interrupt sources
• Three Analog comparators
• Voltage reference
• Precision VDD Monitor/Brown-out detector
• On-chip debug circuitry facilitates full-speed, nonintrusive In-circuit/In-system debugging
• Provides breakpoints, single-stepping, watchpoints, stack monitor
• Inspect/Modify memory and registers
• Superior performance to emulation systems using ICEChips, target pods and sockets
• IEEE1149.1 compliant boundary scan
• Bosch controller area network (CAN 2.0B), hardware SMBus™, SPI™ and two UART serial ports
• Hardware SMBus™, SPI™ and two UART serial ports available concurrently
• Programmable 16-bit counter/timer array with 6 capture/compare modules
• 5 General purpose 16-bit counter/timers
• Dedicated watch-dog timer; Bi-directional reset pin
• Internal calibrated precision oscillator: 24.5MHz
• External oscillator - Crystal, RC, C or clock
• Multiple power saving sleep and shutdown modes

애플리케이션

Industrial