아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
TOOLSTICK330DC
Daughter Card, Toolstick C8051F330 MCU, For Toolstick Base Adapter, USB Debug Interface
제품 정보
기술 문서 (4)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
제품 개요
TOOLSTICK330DC is a toolstick daughter card used along with the toolstick base adapter. Toolstick base adapter provides a USB debug interface and data communications path between a Windows PC and a target microcontroller. The C8051F330 daughter card is used as a general purpose development platform for the target microcontroller. C8051F330 daughter card includes a pair of LEDs, a potentiometer, a resistor across the C8051F330's current DAC output pin, and a small prototyping area which provides access to all of the pins of the device. This prototyping area can be used to connect additional hardware to the microcontroller and use the daughter card as a development platform.
- Toolstick C8051F330 microcontroller
- Toolstick daughter card requires a toolstick base adapter to communicate with the PC
애플리케이션
Embedded Design & Development
각주
ToolStick base adapters can be purchased separately.
경고
Never connect or disconnect a daughter card to or from the ToolStick Base Adapter while the Base Adapter is connected to a PC.
더 이상 제조되지 않음
필터 도구