N6PATC150CMBK

N6PATC150CMBK is a black 1.5m CAT6 cable that meets all Category 6 cable specifications to deliver a reliable Gigabit network connection. This CAT6 patch cable is built using 100% copper wire and is tested to comply with ANSI/TIA 568 C.2 Category 6 requirements. The 50-micron gold connectors deliver optimum conductivity and eliminate signal loss due to oxidation or corrosion. The UTP CAT6 cable is manufactured using high-quality copper conductors and carefully constructed and tested to keep Near-End Crosstalk (NEXT) well within acceptable limits. The patch cable is constructed with 24 AWG copper wire to ensure peak performance for demanding Ethernet applications such as Power-over-Ethernet and 4K or 1080p video streaming. The unshielded CAT6 Ethernet cable also features moulded boots, which offer strain relief by stopping the RJ45 connectors from bending at sharp angles. This reduces the risk of cable damage, which could decrease network connectivity and performance.

• Tested using Fluke® CableAnalyzer™ to comply ANSI/TIA-568.2-D Category 6
• 24AWG stranded copper conductors, up to 100W for PoE applications
• 50-micron gold-plated RJ45 connectors stop rust/corrosion
• Snagless UTP network cable is easily pulled through wiring conduits
• IEEE 802.3bt and DTE power compliance, built w/UL verified wire (E132276-A)
• 250MHz rated, ANSI/T568BB wiring