아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
P2220
Oscilloscope Probe, Passive, 200 MHz, 300 V, 1:1, 10:1
제품 정보
기술 문서 (3)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
제품 개요
The P2220 from Tektronix is a 200MHz passive voltage probe. This passive probe solution provides high reliability and testing accuracy for basic oscilloscope measurements. The P2220 is a compact passive probe with selectable 1X/10X attenuation using switch located on probe head. This passive probe is compatible with TDS200, TDS1000, TDS1000B, TDS2000, TDS2000B and TPS2000 series oscilloscopes. It also provides floating measurement capability up to 30Vrms with TPS2000 series oscilloscopes only.
- 10:1 and 1:1 selectable attenuation ratio
- 1.5m probe length
- Compensation range from 15pF to 25pF
- UL3111-1, CSA1010.1, EN61010-1, EN61010-2-031 and IEC61010-2-031 approved
- Input capacitance of 110pF (1x) and 17pF (10X)
- Input resistance of 1Mohm (1X) and 10Mohm (10X)
애플리케이션
Test & Measurement, Power Management
목차
P2220 passive probe, Retractable hook tip (013-0107-xx), 6inch ground lead (196-3466-xx), Adjustment tool (003-1433-xx), Marker band set (016-1315-xx), Instruction manual (071-1464-xx).
필터 도구