아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
TCP312A
Current Probe, AC/DC, Current Clamp, 30 A, 1 mA, Tektronix Oscilloscopes, TCP312A
- 제조업체:
- TEKTRONIX TEKTRONIX
- 제조업체 부품 번호:
- TCP312A
- 주문 코드:
- 2318651
- 제품 범위
- TCP312A
- 기술 데이터 시트:
- TCP312A Datasheet
제품 정보
기술 문서 (4)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
제품 개요
The TCP312A is an AC/DC Current Probe supports DC - 100MHz, 30A DC. The TCPA300 amplifier, when used with TCP312A probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. Status indicators to provide visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50R, non-compatible probe type. The TCP300 series AC/DC current measurement family is a highly advanced current measurement system for today's current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect (with TCA-BNC) or TekVPI (with TPA-BNC) interfaces, current measurements and calculations are simple and easy. 1 Requires a TDS TEKSCOPE oscilloscope or a TekConnect oscilloscope with TCA-BNC adapter Note: requires TCPA300 amplifier.
- AC/DC input coupling
- Low insertion impedance reduces device under test loading
- Split-core construction allows easy circuit connection
- Status indicators to provide visual operating status and notification of potential error conditions
- Low DC drift and noise allows improved low-level current measurements
- 3rd Party safety certification
애플리케이션
Power Management, Industrial, Consumer Electronics, Communications & Networking, Motor Drive & Control, Automotive, Avionics
각주
In addition, we offer calibration services for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration service page for more details.Automatic scaling and units1
베스트셀러
3 재고 더 필요하세요?
×
지금 제품을 예약하실 수 있습니다 평상시와 같이 필요한 수량을 주문하고 결제하세요. 지금 바로 배송할 수 없는 수량은 주문 예약으로 진행되며 공급업체가 납품하는 대로 배송될 예정입니다. 제품이 발송될 경우에만 대금이 청구됩니다.
주문 시 추가 재고 준비 공급업체의 대략적인 리드타임 21. 11. 22
3-4영업일 이내 수령 가능한 재고 3UK
필터 도구