아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
180XL
Cable Tester, Network, 23 mm Width, 180 mm Height
제품 정보
기술 문서 (1)
CAD 다운로드
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
제품 개요
- Quickly and easily locate high losses, faults in fibre optic cables without expensive equipment
- Confirms fibre continuity, class 2 designation provides safe light levels for the technician
- Universal 2.5mm bulkhead, red/green LED display
- 0dBm output power, compatible with single-mode and multi-mode fibres
- 2Hz modulation mode, pulsed and CW modes of operation
- 650nm ±10nm wavelength, fabry perot emitter type
- Battery life is 80hour with 3.9Wh batteries
- Weight is 120g (not including batteries), dimension is 180mm x 23mm dia
- 2.5mm universal, optional 1.25mm adaptor connector interface
- Certified by CE, CDRH and operating temperature range from -10°C to +45°C
애플리케이션
Test & Measurement
목차
Visual fault locator, 2 AA batteries, Instruction manual, Soft carry case.
각주
경고
44 재고 더 필요하세요?
지금 제품을 예약하실 수 있습니다 평상시와 같이 필요한 수량을 주문하고 결제하세요. 지금 바로 배송할 수 없는 수량은 주문 예약으로 진행되며 공급업체가 납품하는 대로 배송될 예정입니다. 제품이 발송될 경우에만 대금이 청구됩니다.
주문 시 추가 재고 준비 공급업체의 대략적인 리드타임 22. 10. 3
시장 상황으로 인해 배송 기간은 일반적 지침일 뿐이며, 직전에 통지하여 변경될 수 있습니다.