아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
OPA4322SAIPW
Operational Amplifier, 4 Amplifier, 20 MHz, 10 V/µs, 1.8V to 5.5V, TSSOP, 16 Pins
- 제조업체 부품 번호:
- OPA4322SAIPW
- 주문 코드:
- 3117615
제품 개요
The OPA4322SAIPW is a quad low noise CMOS Operational Amplifier with rail-to-rail input and output. It is optimized for low-power and single-supply applications. Specified over a wide supply range of 1.8 to 5.5V, the low quiescent current of only 1.5mA per channel makes this device well-suited for power-sensitive applications. The combination of very low noise (8.5nV/√Hz at 1kHz), high gain-bandwidth (20MHz) and fast slew rate (10V/µs) make the OPA322 family ideal for a wide range of applications, including signal conditioning and sensor amplification requiring high gains.
- Unity-gain stable
- 0.0005% Low THD+N
- 2mV Maximum offset voltage
- 1.5mA/channel Supply current
- 0.1µA/channel Shutdown
- Green product and no Sb/Br
애플리케이션
Signal Processing, Consumer Electronics, Communications & Networking, Security, Sensing & Instrumentation
제품 정보
기술 문서 (0)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
필터 도구