SN751178N

The SN751178N is a dual Differential Driver and Receiver designed for balanced multipoint bus transmission at rates up to 10Mbps. It is designed to improve the performance of full-duplex data communications over long bus lines and meet ANSI standards TIA/EIA-422-B and TIA/EIA-485-A and ITU recommendations V.10 and V.11. The driver outputs provide limiting for both positive and negative currents and thermal-shutdown protection from line-fault conditions on the transmission bus line. The receiver features high input impedance of at least 12kΩ, an input sensitivity of ±200mV over a common-mode input voltage range of -12 to 12V and typical input hysteresis of 50mV. Failsafe design ensures that if the receiver inputs are open, the receiver outputs always will be high.

• Driver positive-and negative-current limiting
• Thermal shutdown protection
• Driver 3-state outputs
• 10Mbps Maximum signalling rate
• 2kV HBM ESD
• 32 Number of nodes

애플리케이션

Industrial, Motor Drive & Control, Building Automation, Metering, Power Management, Security