제품 정보
제품 개요
The TS3USB30ERSWR is a high-bandwidth 1:2 Analog Switch specially designed for the switching of high-speed USB 2.0 signals in handset with limited USB I/Os. The wide bandwidth (900MHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from an USB host device to one of two corresponding outputs, or from two different hosts to one corresponding output. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation and is compatible with various standards, such as high-speed USB 2.0 (480Mbps). The TS3USB30E integrates ESD protection cells on all pins.
- IOFF Supports partial power-down-mode operation
- Low power consumption
- Latch-up performance exceeds 100 mA per JESD 78, class II
- ESD performance I/O port to GND
- Green product and no Sb/Br
애플리케이션
Industrial, Portable Devices, Consumer Electronics
경고
Device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
기술 사양
Analogue Multiplexer/Demultiplexer
3V to 4.3V
QFN
2Channels
10ohm
1:2
Surface Mount
85°C
-
No SVHC (27-Jun-2018)
Single Supply
10ohm
10Pins
6ohm
-
USB
-40°C
-
MSL 1 - Unlimited
법률 및 환경
최종후의 중요 제조 공정이 이루어진 국가원산지:China
최종후의 중요 제조 공정이 이루어진 국가
RoHS
RoHS
제품 준수 증명서