아래 강조 표시된 필드에 잘못된 문자가 포함된 값을 입력했습니다. 유효한 문자만 사용하여 선택을 수정하십시오.
제품이 검색 결과와 정확히 일치하지 않을 수 있음
이전에 고객님은 이 제품을 구매하셨습니다.
주문 내역 보기
EP2C8T144C8N
FPGA, Cyclone II, PLL, 85 I/O's, 320 MHz, 1.15 V to 1.25 V, TQFP-144
- 제조업체:
- ALTERA ALTERA
- 제조업체 부품 번호:
- EP2C8T144C8N
- 주문 코드:
- 1453487
- 기술 데이터 시트:
- EP2C8T144C8N 데이터 시트
제품 개요
The EP2C8T144C8N is a Cyclone® II FPGA with an extend density of 8256 logic elements (LEs) and provide up to 182 usable I/O pins and up to 1.1Mb of embedded memory. Cyclone II FPGA is manufactured on 300mm wafers using TSMC's 90nm low-k dielectric process to ensure rapid availability and low cost. By minimizing silicon area, Cyclone II devices can support complex digital systems on a single chip at a cost that rivals that of ASICs. Unlike other FPGA vendors who compromise power consumption and performance for low-cost, Altera's latest generation of low-cost FPGAs-Cyclone II FPGA, offers 60 percent higher performance and half the power consumption of competing 90nm FPGA. It contains a two-dimensional row- and column-based architecture to implement custom logic. Column and row interconnects of varying speeds provide signal interconnects between logic array blocks (LABs), embedded memory blocks and embedded multipliers.
- Embedded multipliers
- Advanced I/O support
- Flexible clock management circuitry
- Altera megafunction and Altera MegaCore function support
- Altera Megafunctions Partners Program (AMPPSM) megafunction support
- Programmable bus-hold feature
- Programmable output drive strength feature
- Programmable delays from the pin to the IOE or logic array
- Tri-state with weak pull-up on I/O pins before and during configuration
- Programmable open-drain outputs
- Series on-chip termination support
애플리케이션
Automotive, Communications & Networking, Consumer Electronics, Test & Measurement, Imaging, Video & Vision
제품 정보
기술 문서 (2)
CAD 다운로드
--선택...
✔
--선택...
×
사용 약관
CAD Models - Notice
CAD Models and drawings are provided to you on a revocable limited licence for your internal use only but remain the property of the manufacturer who retain all intellectual property rights and ownership. They are provided to assist you in decision making and as design guide but are not guaranteed to be error free, accurate or up to date and is not intended to be taken as advice.
Use of these CAD models and other options provided are downloaded and used entirely at your own risk and by continuing you confirm acceptance of the above.
더 이상 재고 없음
시장 상황으로 인해 배송 기간은 일반적 지침일 뿐이며, 직전에 통지하여 변경될 수 있습니다.
필터 도구