AD5172BRMZ10

AD5172 is a dual-channel, 256-position, one-time programmable (OTP) digital potentiometer. It employs fuse link technology to achieve memory retention of resistance settings. The digital potentiometer, VR, and RDAC terms are used interchangeably. OTP is a cost-effective alternative to EEMEM for users who do not need to program the digital potentiometer setting in memory more than once. This device performs the same electronic adjustment function as mechanical potentiometers or variable resistors but with enhanced resolution, solid-state reliability, and superior low temperature coefficient performance. It is used in applications such as systems calibration, electronics level setting, mechanical trimmers replacement in new designs, permanent factory PCB setting, transducer adjustment of pressure, temperature, position, chemical, and optical sensors, RF amplifier biasing, gain control and offset adjustment etc.

• Fast settling time is 1µs typical at (VA = 5V, VB = 0V, ±1LSB error band)
• Full read/write of wiper register
• Power-on preset to midscale
• Single supply voltage from 2.7V to 5.5V
• Low temperature coefficient is 35ppm/°C typ at (VDD = 5V ± 10%)
• Supply current is 3.5µA typ at (VIH = 5V or VIL = 0V)
• Wiper resistance is 160 ohm typ at (code = 0x00, VDD = 5V)
• Operating temperature range from -40°C to +125°C
• Package style is 10-lead MSOP

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party