AD823ARZ-R7

AD823 is a dual precision, JFET input opamp. It can operate from a single supply of 3V to 36V or from dual supplies of ±1.5V to ±18V. It has true single-supply capability with an input voltage range extending below ground in single-supply mode. This device drives upto 500pF of direct capacitive load as a follower and provides an output current of 15mA, 0.5V from the supply rails. This allows the amplifier to handle a wide range of load conditions. This combination of ac and dc performance, plus the outstanding load drive capability, results in an exceptionally versatile amplifier for applications such as A/D drivers, high speed active filters, and other low voltage, high dynamic range systems, battery-powered precision instrumentation, photodiode preamps, active filters, 12-bit to 16-bit data acquisition systems, medical instrumentation etc.

• Output swings rail-to-rail, input voltage range extends below ground
• −3dB bandwidth is 16MHz typ at (G = +1)
• Settling time to 0.1% is 320ns typ at (G = −1, VO = 2V step)
• Slew rate is 22V/µs typ at (G = −1, VO = 4V step)
• Input offset voltage is 0.2mV typ, no phase inversion with inputs to the supply rails
• Offset voltage drift is 2µV/°C typ
• Input bias current is 3pA typ at (VCM = 0V to 4V)
• Harmonic distortion is −108dBc typ, input voltage noise is 16nV/√Hz typ
• Operating temperature is -40°C to +85°C
• Package style is 8-lead SOIC-N

메모

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party